On this page:

General settings

Default source code options

Using the Technology level or Application level options, validate the Analysis settings for J2EE packages. Make any update as required. These settings apply to the Technology or Application as a whole (i.e. all Analysis Units). There is no override at the Analysis Unit level.

Analysis Unit configuration

The DMT extracts relevant information used to create the automated analysis configuration from the Java project file. Currently the CAST DMT supports these build project files:

  • Eclipse - all version greater than 3
  • Maven - version 2 and 3

For any other build project format (e.g. Apache -ant) CAST AIP will not be able to automatically retrieve build information: no Analysis Unit will be created and no analysis configuration provided. To address this situation, the Analysis Unit and the analysis configuration should be created manually. This case falls outside of the out-of-the-box support and is out of scope of a standard analysis.

To inspect the auto-generated analysis configuration, you should review the settings in each Analysis Unit:

Source Settings

This tab and its child tabs (Java, Resources and Web Application) show the location of each type of source code in the JEE Analysis Unit - this is determined automatically by the CAST Delivery Manager Tool. You should, however, review the configuration and make any changes you need:

Note about the Web Application Root Path

CAST AIP supports the analysis of web applications that do not contain a web.xml application descriptor. In this situation, the "Web Application Root Path" (i.e. the location of web content files such as *.HTML and *.JSP) can be automatically discovered by the analyzer based on the location of the web files on disk. To this end, the field Web Application Root Path at Analysis Unit level is now an optional field in the CAST Management Studio. If the source code does not contain a web.xml file, the Web Application Root Path is now automatically discovered by exploring each Analysis Unit's project path (i.e. the location of the .project file) on disk, however, it can be overridden manually.


The settings in this tab govern how the source code is handled by the CAST analyzer:


Java Version

The JDK version used to compile the application is automatically discovered by the DMT through inspection of the application project files. If the project files are missing the information must be derived from the inspection of the source code or by inquiring with the Application Team.

Class Paths

 Class Paths are automatically discovered by the DMT from the inspection of the project files. When the project file is missing, Class Paths must be added manually to the Analysis Unit and must be discovered via inspection of the delivered source code.

Web Application

Enable JEE Web Profile Analysis

By default this option will be set to YES:

YESWhen set to the default YES position, the analyzer is capable of analyzing web files (JSP, XHTML, HTML, JS etc.) even if no Web Application Descriptor (web.xml) is present in each Analysis Unit in the Application. These web files are instead identified for analysis by exploring each Analysis Unit's Analysis Unit's project path (i.e. the location of the .project file).

When set to the NO position, the behaviour will revert to pre CAST AIP 8.2.x. In other words a Web Application Descriptor (web.xml) must be present in the Application and defined in the relevant field in each Analysis Unit in order that web files (JSP, XHTML, HTML, JS etc.) are analyzed.

Default Client Scripting Language / JSP/Servlet Standard version

Even when the build project format is supported, the CAST AI Admin must configure the "Default Client Scripting Language" and the "JSP/Servlet Standard version". This information can be acquired during the Application qualification step by asking the app team or through source code inspection if this information is missing.

Alternatively you can discover the correct setting as indicated below:

Default client scripting language: In 90-95% of J2EE application the client scripting language is JavaScript. To validate this you should find a JSP or HTML file with a SCRIPT tag that does not have a language definition (do a grep search for "<SCRIPT>") and analyze the language to determine if it is JavaScript or Visual Basic. For an application that mixes both languages, you will need to find a file with both SCRIPT tags that do not have a language specified and SCRIPT tags that do have a language specified. You then need to select the language not specified in the SCRIPT tag as the default language.

JSP/Servlet version: to find this information, open the web.xml file and look at the DTD version used to define the Servlet, for example:

   "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"

Using this information, see the table below for equivalence:

Servlet versionJSP version
2.1 or 2.21.1


For more information about frameworks see J2EE Framework analysis.

Discovery of Hibernate, Struts and Spring relies on the scanning of the .classpath files (Eclipse) and the pom.xml files (Maven).

When out-of-the-box supported frameworks are present but the version of the framework does not match one of CAST supported ones, the proposed configuration recommends the best possible matching profile as a workaround. Impact should be expected on the Transaction count. Improving the configuration to address such gap require ad hoc investigation. The following associations are automatically proposed when a supported framework type cannot be discovered with certainty:

*When no value is set the actual analysis configuration setting is inherited from the Application level settings

 Limitations exist when mixing frameworks.

The discovering of frameworks, other than Hibernate, Struts or Spring, supported out-of the-box by CAST AIP, is based on pattern matching on the .jar files delivered. Configuration for those is a simple Yes (if a .jar file matching is found) and No otherwise. When unsupported frameworks (i.e. not supported out-of the box) are part of the delivery, a Custom Environment Profile need to be created to enable correct processing. See 2.2.2. Links and Transactions for further details about how to address missing links situations.

To identify unknown frameworks or custom frameworks, there are various methods: 




<!DOCTYPE hibernate-mapping PUBLIC 
"-//Hibernate/Hibernate Mapping DTD 2.0//EN" 

<!DOCTYPE hibernate-configuration PUBLIC 
"-//Hibernate/Hibernate Configuration DTD 2.0//EN" 


<!DOCTYPE daoConfigPUBLIC "-//iBATIS.com//DTD DAO Configuration 2.0//EN""http://www.ibatis.com/dtd/dao-2.dtd">


<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">









If you have detected this framework through an XML file, you can start to customize the support of this XML (see chapter 9.1 Manage XML files), but in any case, we recommend that you read up on how it works and how it is configured.

WebServices (WBS) and Enterprise Java Bean (EJB)

Auto discovery and configuration of Web Services (WBS Services) and Enterprise Java Bean (EJB) is not currently supported. The CAST AI Admin will have to gather the required information from the application team or inspect the delivered source code to determine the proper configuration of these parameters.

To find out if your application implements web services, simply search for files with the extension .wsdl or .wsdd in the source file directories. Usually, these files are located in the META-INF directory, but as the source folders do not always match the production folder tree, we recommend searching all the source files.

Custom Web Service Environment Profile

This step is required only if you have a web service in your application.

First, do not forget to select the wsdl file(s) in the Source Settings > XML files of the Analysis Unit.

In a J2EE application, the implementation language is Java. Different profiles have been defined according to the most common implementations. Each of them are related to a specific Mapping Format File that defines the relationship between the web services defined in the WSDL and the Java classes and method that are exposed through this Web Service. In the Java world, you could come up against the following frameworks that are used to expose Web Services:


<?xml version="1.0"encoding="UTF-8"?>
   <java-wsdl-mapping xmlns="http://java.sun.com/xml/ns/j2ee"

Custom EJB Framework

This step is required only if you have EJBs (session, message driven and/or entity) version 2.0 or 2.1 in your application, in which case you will need to select the EJB 2 Environment Profile.

First, do not forget to select the ejb-jar.xml file(s) in the Source Settings > XML files of the Analysis Unit

Then, you need to select the application server that is being used. Note that when no EJB entities are used, you can select the option "EJB 2 - No Entities", there is no need to select an application server since all information about EJB Session and Message Driven Bean are contained in the ejb-jar.xml. 

First check if your ejb-jar.xml contains entities or not:

	<enterprise-beans> ...
		<entity> // ENTITIES ARE PRESENT ...

Then you must identify the application server and check that it is already supported or create a specific Environment Profile.
The best way is to get this information from the customer. If this is not possible, here are some characteristics of each Application Server that may help you to find the information you require:

NOTE: usually, the deployment Mapping File is located in the META-INF directory. However, this is not 100% certain, so make sure you search the entire application folder.

Application Server

Typical Deployment Mapping File Name

DTD in the Deployment Map File 
(bold text indicate information that can help you to find the Application Server and version)



<!DOCTYPE ejb-jar PUBLIC "-//Borland Software Corporation//DTD Enterprise JavaBeans 2.0//EN" "http://www.borland.com/devsupport/appserver/dtds/ejb-jar_2_0-borland.dtd">

WebSphere 4.0



WebSphere 6.0



Oracle AS 8iAS & 9iAS


<!DOCTYPE oracle-descriptor PUBLIC "-//Oracle Corporation.//DTD Oracle 1.1//EN" 

Weblogic 6.x


<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">

Weblogic 7 & 8


<!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 7.0.0 EJB//EN' 'http://www.bea.com/servers/wls700/dtd/weblogic700-ejb-jar.dtd'>

IMPORTANT: The analysis expects the Deployment Mapping File to be in the META-INF directory. So what can you do when this is not the case? Since the default persistence configuration (the lines Application Server - Persistent Label that appear in this menu) can't be changed, you need to create another one and set the correct path.

Specific required files

Depending on the Application Server, you may need to have other files that depend on the Deployment Mapping File listed in the previous table to make the analysis function correctly. If they are not present, you must request them from the customer:

Other Application Servers or versions:

If the Application Server does not figure in the list provided in the Options page: refer to section § Customize an XSLT file for EJB.

In the case you have entities, do not forget to add a dependency: Source = this analysis unit, Target = database.

Advanced J2EE Configuration

Please see the following pages for more information about advanced J2EE analysis configuration:

Manual configuration

When the automated configuration fail or it is not possible (i.e. project build file format not supported), the CAST Admin must resort to an in-depth inspection of the source code to build the Analysis Unit and configure them manually.  For typical J2EE application this would require identify all application components including: