Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Summary: step-by-step instructions for your back-end AIP Node installation.


You will need to run the AIP Console installer on each AIP Node (i.e. a machine on which AIP Core is already installed) that you want to manage with AIP Console.

To run the setup, local Administrator privileges are required.

GUI installation

To start the installation, double click the executable JAR file as provided with the installation media. If you are using OpenJDK or you are using a Linux environment, you may not be able to execute the .JAR file, instead use the following command to open the JAR in GUI mode:

java -jar AIP-Console-<version>.jar

You can run the above command in the Command Prompt window (CMD) - ensure you launch the CMD window with elevated permissions (run as administrator).

The next steps depend on the release you are using:

Step 1

The installation wizard will be displayed:

  • If the wizard cannot locate a previous installation of the AIP Node package in the default installation location %USERPROFILE%\CAST (Windows),%PROGRAMFILES%\CAST\AipConsole (Windows), $HOME\CAST\AipConsole (Linux) or in the Window Registry (if installing on Windows), then the Install option will be automatically selected.
  • If the wizard locates a previous installation of the AIP Node package in the default installation location %USERPROFILE%\CAST (Windows),%PROGRAMFILES%\CAST\AipConsole (Windows), $HOME\CAST\AipConsole (Linux) or in the Window Registry (if installing on Windows), then the Upgrade an existing installation option will be automatically selected. In this case:
    • If you do not want to update the existing installation, ensure you choose the Install option and proceed with a "clean installation" in a different installation location.
    • If you want to update the previous installation, please see Upgrade process.

Click to enlarge

Step 2

Choose a location on the local machine that will be used for the AIP Node package installation. The setup will suggest: %PROGRAMFILES%\CAST\AipConsole but you are free to choose a different location. The package will be installed in a sub-folder called AipNode. If the folder does not already exist, the installation wizard will create it. Click Next to continue:

Step 3

Choose a location for your AIP Node "data" - this location will contain items such as logs/delivery/deploy/upload/backup and other non-user specific items such as .properties files. The setup will suggest: %PROGRAMDATA%\CAST\AipConsole but you are free to choose a different location. A sub-folder called AipNode will be created to store the data items relating to the AIP Node package and the installation wizard will set Full Access permissions on the these folders to all authenticated users:

In previous releases of AIP Console, all these items were stored in <installation_location>\AipNode\dataYou can modify the locations of the deliverydeploy, upload and backup folders when the installation is complete and before onboarding your first Application (recommended). See Configure AIP Node storage folder locations - optional.

Step 4

Choose the installation packages you require - in this example we are installing only the AIP Node package (untick the AIP Console package). Click Next to continue:

If the installation wizard detects a previous installation in Step 1, and you have chosen the Install option, and you choose to install to the existing installation location, a check will be made to ensure the following folders are empty when you click Next:

  • %PROGRAMFILES%\CAST\AipConsole\AipNode
  • %PROGRAMDATA%\CAST\AipConsole\AipNode

The solution for both errors is to choose a different location for the installation by returning to Step 2 using the Previous button in the installation wizard.

Error 1

Error 2

Step 5

Fill in the information that is required by the AIP Node package with regard to the port used, AIP Core location and CAST Storage Service/PostgreSQL options. Click Next to continue:

Server configuration port

This port will be pre-filled with 8082. This is the port number which the AIP Console package will use to communicate with the API Node package. If the port is already being used by another service, you can choose another custom port.

If you would like to use a secure https port, please choose a non-secure port for the initial installation process and then change it post installation (see Changing Console and Node port numbers - activating HTTPS).

AIP locationEnter the location of the CAST AIP installation on the local server. This will normally be: %PROGRAMFILES%\CAST\<version>.
Database host and port

Enter the hostname/IP address and port number of the CAST Storage Service/PostgreSQL instance that this AIP Node will use for the CAST schema "triplet" required for each Application managed on the AIP Node (Analysis, Dashboard, Management schemas). This CAST Storage Service/PostgreSQL instance can either be installed on the local server or a remote server. The field will be pre-filled with localhost:2282, which assumes a CAST Storage Service 3 installed on the local server.

Database username

Enter the credentials for the CAST Storage Service/PostgreSQL configured in the Database host and port field. The login and password fields will be pre-filled with the default credentials: operator/CastAIPThese credentials will be encrypted before being stored in a .properties file:

Database password
Database nameThe database name on your target CAST Storage Service/PostgreSQL instance. By default, postgres will be populated, however, if you are using AIP Core ≥ 8.3.40 and wish to store your application schemas in a custom database (i.e. not the postgres database) enter the name of the custom database.

Step 6

The token is then generated: in a multi analysis node installation scenario (i.e. large/enterprise) this token will be required when the AIP Console package is installed, (and also when adding the node to an already installed AIP Consoleso take note of it:

Step 7

Fill in the information that is required by the AIP Node package with regard to the Windows Service. Click Next to continue:

Windows ServiceInstall as a Windows Service

When ticked (default position), this option will install the package as a Windows Service so that you can more easily stop and start the package.

Note that:

  • the service will be set to start automatically and will be running unless you have specifically disabled this option (see below):

  • this option is ineffective when installing the AIP Console package on a Linux server.
Start the service after installation

When ticked (default position) the Windows Service will be started after it is installed (recommended).

Log on as

By default, this option is ticked, therefore you should fill in Service User account credentials that will be used to run the service:

If you untick the option, the Local System account will be used to run the service, however, CAST does not recommend this and a warning will be displayed when you click Next:

CAST highly recommends that the Local System account is not used to run the Windows Service. This is particularly true if:

In both these situations, the user running the Windows Service will be used to access the proxy/shared network resources.

Instead CAST recommends using the login credentials that match the log in used to install AIP Console/AIP Node/AIP Core/set system proxy settings etc. - for example, this could be a specific "service account" that is created specifically for installing and running AIP Console/AIP Nodes/AIP Core/setting system proxy settings. This service account would also therefore have access to the shared network resources and would be able to use the system proxy settings.

Step 8

Choose whether to create shortcut icons and Start menu entries for the AIP Node package. The installation will start when you click Next:

Step 9

The installation process will start. Click Next when complete:

Step 10

The installation process is complete:

CLI console installation

Open a command prompt (for example CMD with elevated permissions (run as administrator)) and move to the location where the executable JAR file as provided with the installation media is stored. Start the installer in console mode by launching the following command:

java -jar AIP-Console-<version>.jar -console

The interactive console installer will then start. The steps for the installation process are similar to the GUI installation. Please refer to the GUI installation above for the list of required steps, parameters, default values, etc. Ensure you select ONLY the AIP Node package for installation:

Default values are indicated in square brackets ([like this]) and will be used if the input is not filled with a different value.

Automated (unattended) installation

Available in AIP Console v. ≥ 1.16.

It is possible to run the AIP Console installer in unattended mode using predefined settings stored in a specific file.

Create and configure .defaults files

The .defaults file can contain configuration settings for both the AIP Console and AIP Node packages in a situation where you would like to install the AIP Node package on the same server as AIP Console. However, CAST recommends using a dedicated server for the AIP Node package.

The first step is to create a .defaults file (you can name this however you want, for example unattended.defaults). This file contains the settings and options that you want to use for your unattended installation. An example is provided below containing all available options for installing the AIP Node package. Please refer to the GUI installation above for an explanation of the available options. Fill in the options to suit your own deployment scenario:

# CAST AIP Console installation configuration

# Installation Directory for the applications - note that using $USER_HOME/CAST/ will auto translate to %USERPROFILE%\CAST\
INSTALL_PATH=C:/Program Files/CAST/AipConsole

#Setup mode(custom,upgrade) - custom = "install" in the GUI installer.
# Components to install
# "full" to install everything
# "cmsapi" to install AIP Node only
# "webi" to install AIP Console only

# ==================
# AIP Node Configuration
# ==================

# CMS API Port
# CAST AIP location
# Database host and port
# Database username
# Database password

# ==================
# Windows Services Configuration
# ==================
# Install as Windows Services (true by default)

Run the installer with the .defaults file

To run the AIP Console installer in unattended mode, run the following command, changing the .default filename to the one you wish to use:

java -jar AIP-Console-<version>.jar -defaults-file unattended.defaults -auto

For example:

You can check that the installation completed by checking the following file to ensure that the settings you require have been correctly populated:


What is installed?

When the installation process is complete, the following will have been installed:


The package will be installed to the location specified in Step 1:

Data folder

This is valid only for ≥ 1.19.x.

The package will be installed to the location specified in Step 3:


If you chose to create shortcuts during the installation they will be created, for example:

Windows Service

The following Windows Services will be created if you enabled the relevant option:

Windows Service nameListening PortAuto start?Notes
CAST AIP Node Service8082 (default)(tick)You may need to adjust firewall rules on the server to allow incoming connections on the listening port if this server is remote to AIP Console. 

RAM considerations for Windows Services and startup batch scripts

 "Out of the box", the Windows Services and batch scripts made available to run the AIP Nodes - which is a Java application - are configured to run with conservative RAM memory allocations as shown in the table below:

Xmx value1024MBMaximum memory allocation pool for a Java Virtual Machine (JVM).
Xms value256MBInitial memory allocation pool for a Java Virtual Machine (JVM).

This means that even though the host server may have 64GB RAM available (for example), it will only give a maximum of 1GB to the JVM in which the AIP Nodes run. You may therefore find that this is not sufficient and you may receive low memory/out of memory errors when running analyses or snapshots. If this is the case, CAST recommends increasing the Xmx and Xms values until your low memory/out of memory exceptions have been resolved as explained below.

See Configuring RAM for AIP Console front-end and AIP Nodes for more information about changing the RAM allocations.

  • No labels