CAST AIP provides the possibility to extend the standard set of metrics provided by default. This extension of the "out of the box" configuration can be defined using an XML file called XXXCastMetrics.xml. For each technology on which you want to define custom metrics, one corresponding file must be created.
Custom metrics can be defined for:
- standard CAST supported technologies
- custom technologies configured via the CAST Universal Analyzer
Custom metrics are grep based metrics that use regular expressions to generate the required data. They are not based on the technology's grammar - if, indeed there is any.
Please note that:
- The legacy CastMetrics.xml file that is stored in the CAST installation folder is no longer used during an analysis/snapshot generation. If you have customized this file in the past, its content must be moved to one or several XXXCastMetrics.xml files. It is highly recommended to have one file per custom language or one file for custom metrics for a standard language.
- You do not need to use the Load MetaModel from disk option in CAST Server Manager - as long as the XXXCastMetrics.xml file is present when the analysis is run/snapshot is generated, then it will be taken into account.
File naming conventions
The XXX in the name of the XML file signifies that you are free to choose how you name the file provided that you retain CastMetrics.xml as the end part of the filename. CAST suggests using the name of the technology as a prefix to CastMetrics.xml but this is not obligatory. In addition you are not limited to three characters. You could, for example, use a file called CASTXSLCastMetrics.xml.
Ensuring the XXXCastMetrics.xml file is taken into account
Step 1 - File location
The XXXCastMetrics.xml file must be manually copied to the following location so that it is taken into account during the analysis:
When extending metrics for technologies analyzed by a custom UA language pack
- When extending metrics for technologies that are analyzed by a custom UA language pack, the <technology folder name> folder will already exist. It is the same folder as is used to store the XXXMetaModel.xml file and the files used in the language pack.
- In addition, the XXXCastMetrics.xml file may already exist in this folder - if this is the case, CAST recommends creating an additional XXXCastMetrics.xml file to configure your bespoke metrics to avoid modifying the XXXCastMetrics.xml file configured for the language pack. Take the example of this PHP Language Pack - this already has a PHPCastMetrics.xml file and an additional PHPCustomCastMetrics.xml has been created for bespoke metrics:
When extending metrics for technologies analyzed by a standard CAST AIP analyzer
- When extending metrics for technologies such as Cobol, VB or other technologies supported by a standard CAST AIP analyzer, you will need to create the <technology folder name> folder yourself. You can find out what name to use by using the same folder name as is used in AIP - navigate to the following location to see a list of core AIP technology names:
- Take the example of extending the Cobol technology - the CobolCastMetrics.xml file should located in a folder called Cobol:
Step 2 - Install the <all users dir> extension with CAST Server Manager
You now need to run CAST Server Manager > Manage Extensions to install the <all users dir> extension. This will ensure that the custom XXXCastMetrics.xml is installed correctly. This is explained in more detail here:
XML file encoding
The XXXCASTMetrics.xml file used in the Language Package must use the UTF-8 encoding as follows:
- The XML declaration (the first line of the file) must include the UTF-8 encoding attribute:
- The XML file must be saved in UTF-8 format
General Structure of the file XXXCastMetrics.xml
An example XXXCastMetrics.xml file is shown below:
Each <METRIC> tag defines the name and the type of the metric to be created. The type is the ID of the metric, also called InfSubTyp in the CAST Analysis Service.
Each metric must be declared for each technology we want to make it available for. In the example below the metric "Use of printf in a do/while" has the ID 3000000 and is available for C++.
Each metric must contain a <LANGUAGE NAME> tag. For example:
Please use one of the following:
Configuring the Search Mode
In order to optimize the search of your code, there are several tags that can be activated:
- For the search in the source code use the tag : <SEARCH_IN_CODE>
- For the search in comments use the tag <SEARCH_IN_COMMENT>
- For the search in strings use the tag <SEARCH_IN_STRING>
- For the search in embedded SQL use the tag <SEARCH_IN_EMBEDDEDSQL>
- For a case sensitive search use the tag <SEARCH_CASE_SENSITIVE>
- If we need to match the whole word only, then use the tag <MATCH_WHOLE_WORD_ONLY>
Search section and Regular expressions
There are two methods that can be used to search your code:
- Simple search
- Nested search
The tag <INIT> provide the possibility of the initialise the value of the metric for which the pattern matched. For example, if the metric contains:
this means that the value 3 will be added to every value of the metric pushed to the CAST Analysis Service. There is no initialization of the metrics for the objects that don't match.
The simple search is based on one or several regular expressions (RegExp). The search has succeeded if one or several regular expressions have matched.
The type of search is recommended for the following patterns:
The option <THRESHOLD> provides the possibility to define a threshold on the number of matches for a given object. If this value is lower that the threshold then it is ignored. If this is not the case the value "1" is set for this metric in the CAST Analysis Service.
For example, consider the following metric:
on the following C++ source code: TestThreshold.cpp
The metric will match four times (one match for every printf present in the do/while). However, as the threshold is set to 5, no value will be saved in the CAST Analysis Service. If the threshold had been set lower at 4, the value 1 would have been saved.
The tag <ADD> provides the possibility to force the metric to count the nested level of the matched pattern. The value defined here will be added to the metric value for every nested BEGIN/END statement.
Example1: Consider the following metric:
For the following C++ source code: TestAdd.cpp
For the example above, the metric will find one match for BEGIN/CONTENT/END and six matched for the three do/while nested loops. As such, the value 7 will be saved in the CAST Analysis Service.
Example 2: Consider metric A, defined with (simplified syntax):
And metric B with:
Then for the following code:
- metric A will be valued 5 + 2 + 1 = 8 (i.e. INIT + ADD + Number of MATCHES)
- metric B will be valued 5 + 1 = 6 (i.e. INIT + Number of MATCHES)
While for the following code:
- metric A will have 5 + 2 + 2 + 1 = 10 (i.e. INIT + 2 x ADD + Number of MATCHES)
- metric B will have 5 + 1 = 6 (i.e. INIT + 2 x ADD + Number of MATCHES)