Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »


Summary: information to help you plan your standalone CAST Architecture Checker installation.

Recommended hardware

CPU

Platform

RAM

DISK

1 processor X 4 core

64-bit

8GB min

240GB

Supported Operating Systems

Operating SystemSupportedSupported by referenceNotes
Microsoft Windows 7 SP1 64-bit(tick) 
Microsoft Windows 8 64-bit (tick)
Microsoft Windows 8.1 64-bit(tick) 
Microsoft Windows 10 64-bit(tick)

Microsoft Windows Server 2008 R2 SP1 64-bit (Standard edition) (tick)
Microsoft Windows Server 2012 64-bit (Standard edition) (tick)
Microsoft Windows Server 2012 R2 64-bit (Standard edition) (tick)
Microsoft Windows Server 2016(tick)
Windows Server 2016 is only supported by CAST when installed in Desktop Experience mode (i.e. with a GUI).
Note that the CAST Architecture Checker is a 32-bit application, and will therefore also install on the equivalent 32-bit versions of the Operating Systems listed above (if they exist).

Supported CAST AIP Management Service schemas

CAST Architecture Checker can check models against the following CAST AIP Management Service schemas:

CAST AIPCAST Architecture Checker
8.3.x(tick)
8.2.x(tick)

Installation coexistence

Legacy releases

CAST Architecture Checker has been "decoupled" from the CAST AIP setup so that it is now "standalone" (it will continue to be shipped with CAST AIP but this release will not receive any new features - only bug fixes). If you already have previous legacy releases of CAST Architecture Checker installed on the target workstation originating from the CAST AIP setup, then you can install a standalone release of the CAST Architecture Checker at the same time and the two can co-exist without issue since the default installation locations are different.

Below is a screenshot of the Programs and Features section of the Windows Control Panel displaying two installed versions of the CAST Report Generator, one from the CAST AIP setup (1.2.0) and one as standalone (1.3.0):

Standalone releases

Standalone releases of CAST Architecture Checker are all separate releases and can co-exist on the same machine without issue, i.e. you can have any combination of releases installed at the same time, for example: 1.3.0 and 1.4.0, or 1.3.0, 1.4.0 and 1.4.1 since the installation locations are release number dependent.

  • No labels