This panel enables you to define the various additional parameters for the extraction process:
|Configuration File Path|
This field is used to specify a specific .config file that tells the extractor what to extract - it is only used if the default values need to be overwritten.
CAST recommends leaving this parameter as defined.
|Extraction File Path|
This command specifies the location you would like the extractor to output the Extraction action results to.
If you want to store the results of the extraction process in a different place, enter a location manually or use the Browse button to locate a folder. Please make sure that you omit any file extension. The screen shot below will result in an archive format file called exportResults.castextraction located in the D:\Squirrel\results folder: