Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

Summary:

  • This section describes how to run the CAST AIP installer, i.e. the installation of a dedicated workstation (known as the CAST Administration workstation) with all CAST AIP end-user applications. Also see Overview of CAST Application Intelligence Platform for more information.
  • Note that existing releases of CAST AIP can co-exist with the current release of CAST AIP on the same machine, provided that the installation locations are different.

Introduction

CAST AIP is shipped as an installer (setup). This contains the following:

...

Info
Note that in previous releases, one installer was provided combining both CAST AIP and the CAST Storage Service.

CAST Storage Service and order of installation

This document describes the installation of CAST AIP on one dedicated workstation. If you are intending to use the CAST Storage Service for your CAST AIP storage requirements (see the DBMS section in Supported Platforms), AND you intend to run the CAST Storage Service on the same workstation as used for CAST AIP, then CAST highly recommends that you install the CAST Storage Service to the workstation BEFORE you run the CAST AIP installer. This is so that a connection profile to the CAST Storage Service (for use in CAST Server Manager for installing the Storage components (see Install CAST AIP schemas)) can be generated automatically by the CAST AIP installer - easing the onboarding and configuration process.

...

Info
If the CAST AIP setup detects the presence of a CAST Storage Service on the workstation (whether installed through the standalone installer or from a previous release of CAST AIP), then a connection profile to that CAST Storage Service instance will be created automatically and will be available for use in  CAST Server Manager.

Installation requirements

Info
Please see Appendix - CAST Administration workstation installation and hardware requirements for more information about hardware and installation requirements.

(tick)

Ensure you have read all Release Notes accompanying CAST products for any last-minute information. In particular, please read: Supported Platforms, Supported Character Sets, Hardware Requirements, Functional Information and Technical Information.

(tick)

Ensure that the machine to be used for the CAST Administration workstation meets all hardware and operating system requirements (see Appendix - CAST Administration workstation installation and hardware requirements)

(tick)

Ensure that your user login on the CAST Administration workstation has sufficient user privileges to install applications (see Appendix - CAST Administration workstation installation and hardware requirements)

(tick)

Make sure that the CAST Administration workstation can access any necessary network resources (such as a machine to be used to host the Storage component)

(tick)

CAST AIP is delivered in a ZIP file. Make sure you have the required ZIP file ready and unzipped.

(tick)

Make sure that you disable your anti-virus software prior to launching the CAST setup.exe

Anchor
installproc
installproc
Installation procedure - AIP

  • Right click the setup.bat file located in the folder created during the unzip process:

...

Info

If you would like to modify the locations CAST applications use to store temporary and other required data, please see Appendix - Modifying default CAST data storage locations.

Which third-party items are installed with CAST AIP?

When you complete an installation using the CAST AIP setup, if they are not already installed and in addition to the CAST AIP components,the following third-party items will be installed to the target workstation:

  • Visual C++ 64-bit Redistributable Packages for Visual Studio 2013
  • Visual C++ 32-bit Redistributable Packages for Visual Studio 2013
  • Visual C++ 64-bit Redistributable Packages for Visual Studio 2010
  • .NET framework 4.5.2 (when required - if a more recent version is already present, then nothing is installed)

  • Microsoft Build Tools 2015 (BuildTools_Full.exe)

Automated workstation installation procedure

If you need to install CAST AIP on a large number of workstations (10+, 100+ PCs) in exactly the same way, you may consider the possibility of automating this process using the command-line parameters of the setup module. This will launch the setup installer unattended.

...

  • InstallShield® will now open and run the installation unattended using the parameters saved to the SETUP.ISS file on the network - you will not need to intervene to move on through the various steps. The setup parameters will be identical to those defined in the first setup carried out on the first workstation and saved in the SETUP.ISS file.
  • You will notice the setup install process running on the workstation's task bar for the duration of the operation. When completed, InstallShield® will close automatically and CAST AIP will be ready to run.

Deploying CAST AIP on Terminal Server or in a Citrix environment

Installing applications on a terminal server must be carried in a specific way to ensure they are usable by all users of the terminal server.

...

Info

Notes

  • Please also note that CAST AIP needs to write DATA to files located in the CAST AIP installation folder. Thus, all users must have write privileges for the folder containing CAST AIP.
  • Please ensure that any Windows user designated to run CAST AIP over Citrix has already logged into the Windows machine hosting the Citrix environment. You can log in physically or via Remote Desktop - this ensures that the User profile is created and setup correctly. Without this, CAST AIP cannot function.
  • Please ensure you also add the CAST_CURRENT_USER_PERSONAL_PATH key to the CastGlobalSettings.ini file (see the documentation here). You should set this key to a location that is specific to the current user, for example %UserProfile%\Documents\.

Installing a Service Pack (i.e. CAST AIP 8.2.1)

CAST ships updates to CAST AIP 8.2.0 in the form of Service Packs. These Service Packs are numbered starting 8.2.1. A Service Pack is best described as a collection of updates, fixes, or enhancements to the "baseline" CAST AIP 8.2.0 delivered in the form of a single installable package.

Things you should know about Service Packs

Specifically and only for CAST AIP 8.2.1

  • To install a Service Pack, you must already have a full "baseline" version of CAST AIP installed on the workstation. In this scenario, full baseline version means an installation of CAST AIP 8.2.0.
  • A Service Pack is limited to the installation of CAST AIP: no Service Pack is released for upgrading the CAST Storage Service.
  • A Service Pack can be installed over an existing Service Pack (for example CAST AIP 8.2.0 + SP1 + SP2)
  • On completion of the installation of a Service Pack, you will need to follow the Upgrading CAST AIP guide to upgrade CAST AIP 8.2.x databases/schemas to be compliant with the new Service Pack.
  • Service Packs cannot be uninstalled - please see Appendix - Uninstalling and reinstalling CAST for more information.
  • Any files in the CAST AIP installation folder that have been removed or modified will be listed in an information popup during the Service Pack installation process. This is for information only and will not block the Service Pack installation. Any files that have changed in the Service Pack release, including those modified by the user, will be overwritten/replaced during the Service Pack installation process, however, a snapshot backup of the previous installation (see point below) is taken and individual files can be restored from this backup if necessary.

...

  • Any files that have changed in the Service Pack release, including those modified manually by the user, will be overwritten/replaced during the Service Pack installation process, however, a backup of modified files is taken (stored in %PROGRAMDATA%\CAST\CAST\<major.minor version> under backup\SP_<version>) and individual files can be restored from this if necessary.

For CAST AIP 8.2.2 and above

  • The Service Pack installer does not require any previous installation of CAST AIP to be present on the workstation, i.e. CAST AIP 8.2.2 can be installed even if CAST AIP 8.2.0 is NOT installed on the workstation.
  • A Service Pack is limited to the installation of CAST AIP: no Service Pack is released for upgrading the CAST Storage Service.
  • A Service Pack can be installed over an existing Service Pack (for example CAST AIP 8.2.0 + SP1 + SP2)
  • Installing a Service Pack (i.e. CAST AIP 8.2.2) when a previous release of the same release "track" also exists on the workstation, will transform the previous release (i.e CAST AIP 8.2.0) into CAST AIP 8.2.2: Service Packs do not exist as separate entities on the workstation.
  • When a Service Pack is installed, an entry will be added to the Add/Remove Programs or Programs and Features entries in the Windows Control Panel. If a previous release of the same release "track" also exists on the workstation, the entry for the previous release will be modified and will show the most recent release. In other words only one entry will be visible in the Add/Remove Programs or Programs and Features entries in the Windows Control Panel regardless of the number of Service Packs that have been installed.
  • On completion of the installation of a Service Pack, you will need to follow the Upgrading CAST AIP guide to upgrade CAST AIP 8.2.x databases/schemas to be compliant with the new Service Pack.
  • Service Packs cannot be uninstalled - please see Appendix - Uninstalling and reinstalling CAST for more information.
  • If a previous installation of CAST AIP of the same release "track" also exists on the workstation and if any files in the existing CAST AIP installation folder have been modified manually, they will be listed in an information popup during the Service Pack installation process. This is for information only and will not block the Service Pack installation:

...

  • Any files that have changed in the Service Pack release, including those modified manually by the user, will be overwritten/replaced during the Service Pack installation process, however, a backup of modified files is taken (stored in %PROGRAMDATA%\CAST\CAST\<major.minor version> under backup\SP_<version>) and individual files can be restored from this if necessary:

Pre-installation check list

Before beginning the installation process, please ensure that you have carried out all of the following tasks and that the following requirements have been met:

(tick)

Ensure you have read all Release Notes accompanying CAST products for any last-minute information

(tick)

Ensure that you have read Things you should know about Service Packs (see above) prior to starting the installation

(tick)

CAST AIP is delivered in a ZIP file (containing the CAST setup.bat). Make sure you have the required ZIP file ready

(tick)

Unzip the ZIP file to a convenient location on the workstation

(tick)

Make sure that you disable your anti-virus software prior to launching the CAST setup.bat

Service Pack installation procedure

  • Right click the setup.bat file located in the folder created during the unzip process:

...