Administration Center - Settings - Dashboard Integration

Mon, 01 Jan 0001 00:00:00 +0000

This panel provides settings for the CAST dashboard integration process, described in more detail in Embedded CAST Dashboard deployment process:

Console ≥ 2.x

Console ≥ 2.x	This option performs an update to ensure that the embedded Dashboard integration settings are correct. No other options are available or necessary. If you are using Console Enterprise mode in Docker, then your embedded Dashboards will be preconfigured and no action is required. If you are using Console Enterprise mode via Java JAR installers, OR you are using Console Standalone, this button should be used following the installation of the embedded RestAPI to configure the embedded Dashboards. See Embedded CAST Dashboard deployment process using Java JAR installer.
Console ≥ 1.25 Administration Center - Settings - Imaging Settings Mon, 01 Jan 0001 00:00:00 +0000 Introduction The process of exporting and importing data into a CAST Imaging instance has previously been a manual process that must be actioned following the completion of either a snapshot or an analysis. This panel provides the settings required to fully automate this data export and import as part of the standard onboarding and rescan processes, so that when these processes are complete, all data is ready to use in CAST Imaging without having to perform any additional manual actions. Administration Center - Settings - CAST Highlight Settings Mon, 01 Jan 0001 00:00:00 +0000 This panel is provided for customers that are using the com.castsoftware.highlight2mri extension to inject CAST Highlight results as properties of objects generated during an application analysis. By linking directly to your CAST Highlight account, your CAST Highlight SCA vulnerabilities can be downloaded direct and injected into the analysis results, which is then reused in CAST Imaging. You can find out more information about when to fill in these fields in Highlight 2 MRI. Administration Center - Settings - License Key Mon, 01 Jan 0001 00:00:00 +0000 Info This section is NOT visible when the following is true: when you are using Console ≥ 2.2 AND when a Named Application license key scope has been chosen in Complete start-up wizard - v. 2.x The section is visible when the following is true: when you are usingConsole ≤ 2.1 when you are using Console ≥ 2.2 AND when a legacy license key or a Contributing Developer license key is being used. Administration Center - Settings - Proxy Mon, 01 Jan 0001 00:00:00 +0000 When you Complete start-up wizard - v. 1.x/[Complete start-up wizard v. 2.x](/export-v2/aipconsole/install-aip-console/initial-configuration-steps/initial-configuration-steps-v-2-x/complete-start-up-wizard-v-2-x/)you have the choice to configure a proxy server (such as Squid) if your organization requires internal systems to use one for all connections. These proxy settings are also available here in the Administration Center: Warning Extension Downloader limitation (for Console ≤ 1.24) The Extension Downloader (a tool present on each Node which is used by Console in ≤ 1.24 to download extensions) cannot be configured to obey a manual proxy configuration defined in Console. Instead, if your organization uses a proxy, CAST recommends that: Administration Center - Settings - System Node Logs Mon, 01 Jan 0001 00:00:00 +0000 Info The section is visible only when the following is true: when you are usingConsole ≥ 2.7 AND when you are using Console Standalone mode. If you are using Enterprise mode, Node Service logs can be accessed via the Nodes panel. This section allows you to download the Node Service logs (i.e. the %PROGRAMDATA%\CAST\AIP-Console-Standalonelogs\aip-node.logfile) when you are using Console Standalone mode. Choose a date range and then download the logs using the download icon. Logs are provided in ZIP format, within which the log file(s) are available. The ZIP file name uses the following syntax: `node-logs_YYYY-MM-DD_YYYY-MM-DD.zip`

This option performs an update to ensure that the embedded Dashboard integration settings are correct. No other options are available or necessary.

If you are using Console Enterprise mode in Docker, then your embedded Dashboards will be preconfigured and no action is required.
If you are using Console Enterprise mode via Java JAR installers, OR you are using Console Standalone, this button should be used following the installation of the embedded RestAPI to configure the embedded Dashboards. See Embedded CAST Dashboard deployment process using Java JAR installer.

Console ≥ 1.25

Administration Center - Settings - Imaging Settings

Mon, 01 Jan 0001 00:00:00 +0000

Introduction

The process of exporting and importing data into a CAST Imaging instance has previously been a manual process that must be actioned following the completion of either a snapshot or an analysis. This panel provides the settings required to fully automate this data export and import as part of the standard onboarding and rescan processes, so that when these processes are complete, all data is ready to use in CAST Imaging without having to perform any additional manual actions.

Administration Center - Settings - CAST Highlight Settings

Mon, 01 Jan 0001 00:00:00 +0000

This panel is provided for customers that are using the com.castsoftware.highlight2mri extension to inject CAST Highlight results as properties of objects generated during an application analysis. By linking directly to your CAST Highlight account, your CAST Highlight SCA vulnerabilities can be downloaded direct and injected into the analysis results, which is then reused in CAST Imaging. You can find out more information about when to fill in these fields in Highlight 2 MRI.

Administration Center - Settings - License Key

Mon, 01 Jan 0001 00:00:00 +0000

Info

This section is NOT visible when the following is true:

when you are using Console ≥ 2.2 AND when a Named Application license key scope has been chosen in Complete start-up wizard - v. 2.x

The section is visible when the following is true:

when you are usingConsole ≤ 2.1
when you are using Console ≥ 2.2 AND when a legacy license key or a Contributing Developer license key is being used.

Administration Center - Settings - Proxy

Mon, 01 Jan 0001 00:00:00 +0000

When you Complete start-up wizard - v. 1.x/**[Complete start-up wizard

v. 2.x](/export-v2/aipconsole/install-aip-console/initial-configuration-steps/initial-configuration-steps-v-2-x/complete-start-up-wizard-v-2-x/)**you have the choice to configure a proxy server (such as Squid) if your organization requires internal systems to use one for all connections. These proxy settings are also available here in the Administration Center:

Warning

Extension Downloader limitation (for Console ≤ 1.24)

The Extension Downloader (a tool present on each Node which is used by Console in ≤ 1.24 to download extensions) cannot be configured to obey a manual proxy configuration defined in Console. Instead, if your organization uses a proxy, CAST recommends that:

Administration Center - Settings - System Node Logs

Mon, 01 Jan 0001 00:00:00 +0000

Info

The section is visible only when the following is true: when you are usingConsole ≥ 2.7 AND when you are using Console Standalone mode. If you are using Enterprise mode, Node Service logs can be accessed via the Nodes panel.

This section allows you to download the Node Service logs (i.e. the **%PROGRAMDATA%\CAST\AIP-Console-Standalone**logs\aip-node.logfile) when you are using Console Standalone mode. Choose a date range and then download the logs using the download icon. Logs are provided in ZIP format, within which the log file(s) are available. The ZIP file name uses the following syntax: node-logs_YYYY-MM-DD_YYYY-MM-DD.zip

Administration Center - System Settings on Documentation - V2

Administration Center - Settings - Dashboard Integration

Administration Center - Settings - Imaging Settings

Introduction

Administration Center - Settings - CAST Highlight Settings

Administration Center - Settings - License Key

Administration Center - Settings - Proxy

Administration Center - Settings - System Node Logs