This page lists issues when the source code is missing in the code viewer in Enlighten.

Figure 1

Action plan

1. Check if the source code is mapped to the network drive and present on the machine from where you are launching Enlighten. If it is not present then map it and try again to view source code by hitting F11.
2. If the object belongs to any of these technologies - PHP / Shell / Fortran / Flex /RPG then Check if the LISA folder is present on the machine from where you are launching Enlighten. The analyzer first pre-processes the files and stores it in LISA. The pre-processed files residing in LISA folder are then analysed.
   If the LISA folder is not located in your machine from where you are launching Enlighten then you will not be able to view the source code. To solve this issue Get the Location of the LISA from Enlighten and map the network drive if needed.
   1. Press F11 key and see the path in the bottom of Enlighten
   2. Or press F12 key and see the field Object Found in files
       

      Figure 2

   3. If it is not present then map it and try again to view source code by hitting F11
3. If the source code is not mapped then contact CAST Technical Support and provide the below relevant input to help CAST Support team investigate your problem or procure the required information.

Relevant input

1. Screenshot of the issue in Enlighten after dragging the object in the object viewer and pressing F11 key
2. CAST Support Tool (CST) - alias Sherlock with the options Export Source Code , Export Logs , Export Configuration Files and Export CAST Databases checked.