Page tree
Skip to end of metadata
Go to start of metadata

On this page:

Summary: This section describes how to package, deliver and analyze your C / C++ application source code using the CAST Delivery Manager Tool.

Packaging and delivering your source code

Once the extension is installed, no further configuration changes are required before you can package your source code and run an analysis. The process of packaging and delivering your source code is as follows:

What you should package?

Please see C and Cpp - Application qualification specifics for additional hints.

When creating packages to discover and extract your C / C++ application you should create them as follows:


Package name/type





Source code


Source code root folder

Use the "Files on your file system" / SVN / TFS options in the CAST Delivery Manager Tool:

Click to enlarge

What about .h files?

.h files are not considered as "source code" files by CAST and as such are not automatically analyzed. If the location of the .h files is included in the relevant Analysis Unit (Include Path option) then any .h files that are referenced in application source code (.c/.cpp etc.) will be included in the analysis.

Discovery and extraction

Discovery is a process whereby the CAST Delivery Manager Tool will attempt to automatically identify projects within your application using a set of predefined rules. When the Package action is complete, you can view the projects that have been identified in the Package Content tab. When a successfully Packaged application is subsequently deployed in the CAST Management Studio, an Analysis Unit will be created for each project that has been identified during the Discovery process and is not excluded by a rule or filter.

For more information about the methods of discovery that are available please see:

Depending on the source code you have and the way it is provided to you, you should choose a discovery method that best fits your needs. Your choices are as follows, ordered by package completeness (use the first method that matches your situation):

Use the standalone CPP Compilation Database Discoverer

Use the standalone CPP Compilation Database Discoverer. This discoverer requires the output of a special tool that is run while compiling the source code and will log all compile operations (i.e. the build log). The build log is then used to determine the projects (and therefore Analysis Units) that are present in your source code.

Use the Microsoft Visual C++ project discoverer

Use the Microsoft Visual C++ project discoverer. This discoverer is embedded into AIP Core

Use CMake to generate Visual Studio files or a compilation database

Use CMake to generate Visual Studio files or a compilation database, and fall back to one of the previous methods

Create your own custom discoverer (based on make files)


Manually configure the analysis


Use the standalone CPP Compilation Database Discoverer

If your source code is designed to compile on Linux, you can use a compilation logging tool called Scan Build (freely available from CAST - instructions included) while compiling the source code to output two files compile_commands.json and compile_config.json that will contain all the information necessary to compile your source code. These two Scan Build files can be delivered as input with your source code in the CAST Delivery Manager Tool: as long as you have also installed the CPP Compilation Database Discoverer, then the Scan Build output files will be taken into account when you package the source code and projects will be created based on what is found in the Scan Build files (compile_commands.json and compile_config.json).

Note the following:

  • You may need to create additional source code packages in the CAST Delivery Manager Tool to deliver the header folders
  • If you are packaging the code (i.e. running the CAST Delivery Manager Tool) on a machine different from the one where the compilation took place, you will need to make use of the "remapping feature" of the DMT to allow the CPP Compilation Database Discoverer to match the folders you are working with to the folders mentioned in the build log. This remapping feature is provided through the option Is the source code deployed in a specific folder in the development environment:

  • When the CPP Compilation Database Discoverer is installed, the following check box will be available in the CAST Delivery Manager Tool - ensure this is ticked so that discovery functions correctly. If the checkbox is not visible, then the extension has either not been installed or has not been installed correctly:

2) Use the Microsoft Visual C++ project discoverer

This discoverer is embedded into the CAST Delivery Manager Tool - currently the following versions are supported:

  • Visual C++ 2003
  • Visual C++ 2005
  • Visual C++ 2008
  • Visual C++ 2010
  • Visual C++ 2012
  • Visual C++ for versions > 2012  The Analysis Unit generated for this project is mapped to a Visual C++ 2012 environment profile

Visual C++ 2013, 2015, 2017 and 2019 projects, will be discovered as a Visual C++ 2012 project (i.e. the Analysis Unit generated for this project is mapped to a Visual C++ 2012 environment profile). You can therefore:

  • either change the analysis options in the CAST Management Studio so that:
    • "IDE used for this Analysis Unit" is set to "Not Specified"
    • "STL Support" is set to "Cast emulation"
  • or have Visual C++ 2012 installed on the analysis machine and analyse the code as a Visual C++ 2012 project

The following is currently supported:

  • Configures a project for each Microsoft Visual Studio 2003 - 2008 project (*.vcproj file) and each Visual Studio 2010/2012 project (*.vcxproj file) identified.
  • Handles Inherited Property Sheets and standard Visual Studio macros:
    • $(SolutionDir)
    • $(ProjectName)
    • $(InputName)
    • $(ProjectDir)
    • $(InputDir)
  • Only the Release configuration is identified. If there is no Release, then the first configuration is identified instead.

The following information is discovered:

  • Source files:
    • resolved in File System
    • matches pre-defined extensions
    • Not excluded from build
  • Compile directive
  • includes
  • macros
  • Visual Studio version & MFC usage
  • Console

If a property sheet (.vsprops) is referenced from a Visual C++ project (.vcproj or .vcxproj) through the use of an environment variable, no alert is triggered for this variable when discovering the project and no remediation can be added for this alert. Therefore, the property sheet may not be found during the discovery (which leads to badly configured analyses).

Where an environment Variable is used to reference a property sheet, you have several possibilities:

  • Before the discovery, you can change the content of your C++ project so that it refers to the property sheet through a relative path, instead of through an Environment Variable. You can write a script to automate this process.
  • You can also ignore the missing property sheet during the discovery and modify the settings of the Analysis Units in the CAST Management Studio (mostly add the include paths and macro definitions that would have been provided by the property sheet). A good way to share the additional settings between several Analysis Units is to create a new Environment Profile to handle the required changes.

Remember that:

  • The discoverer only understands standard projects (no advanced MSBuild features are supported)
  • The Visual C++ project files may depend on environment variables - if this is the case, you can add these in the CAST Delivery Manager tool after generating the package (see the remediation for missing variable).
  • The appropriate release of Visual C++ must be installed on the machine on which the analysis will run (i.e. the machine from which the CAST Management Studio is run) because the C and Cpp Analyzer requires the headers.

When the source code has been delivered and the Analysis Units have been automatically created, CAST highly recommends that an initial analysis in "test" mode is run. Since the discoverer does not support advanced MSBuild features, the test analysis may uncover missing headers or macros - if this is the case, then the project may use these features.

In the majority of cases, however, you are likely only to encounter missing headers and since the required include paths will have been automatically discovered from the Visual C++ projects, missing headers is a good indication that the source code files were forgotten and are not part of the source code delivery.

In the CAST Delivery Manager Tool, this discoverer is embedded by default and is materialized with the following two checkboxes - ensure they are ticked so that discovery functions correctly:

3) Use CMake to generate Visual Studio files or a compilation database

CMake project files (CMakeLists.txt) are not directly understood by the C and Cpp Analyzer extension, however:

CMake to Visual C/C++ Studio

Using CMake, you can generate .vcxproj files from these projects and thereby make use of the Microsoft Visual C++ project discoverer embedded in the CAST Delivery Manager Tool. You can read the CMake documentation for more information about how to do this. A sample command line might look like:

mkdir build
cd build
cmake -G "Visual Studio 12 Win64"

If you use this method, you will need to "pretend" to compile the code on Windows. If this code has not been designed for that purpose, it may fail to compile. If, when you run the analysis, the log file contains very few errors, you can continue, otherwise, you may want to consult the next section CMake to build log (but using the parameters of the Analysis Units created in this process can be a good basis for the configuration).

CMake to build log (compilation database)

Another option with CMake is to generate compilation databases and use them in conjunction with the CPP Compilation Database Discoverer. These databases are very similar to what is generated by the Scan Build tool (see previous section CPP Compilation Database Discoverer), but they may not contain all the necessary details. We can’t guarantee perfect results if you use this method, but it should still provide adequate results.

4) Create your own custom discoverer (based on make files)

If you use a simple project format, you may want to create your own "discoverer" that understands these projects. A cost-effective version of this option would consist of writing a tool that generates .vcxproj files matching your projects, or a JSON file similar to what the build log discoverer generates.

5) Manually configure the analysis

If none of the previous methods are suitable, you can manually create the Analysis Unit in the CAST Management Studio. This option requires a good understanding of C++ to configure include paths and macros. Please ensure you read and understand background information about C++ compilation before you decide to use this method.

CAST highly recommends that if you need to manually create the Analysis Units, that you get help from someone who knows how the project you want to analyze is built. A C++ projects often consists of different libraries, each one with its own specific compilation options and therefore organizing this can proove costly and complex. To help with this process, CAST AIP includes a test analysis mode. This analysis is faster than a full analysis, and contains a report about things that went wrong and information about how the configuration of the analysis could be improved. CAST recommends that you obtain a "green light" from the test analysis mode before trying a full analysis.

The first step in this manual process is to make sure that you have all the headers available. Either because they are part of the delivery, or because they are available somewhere on the analysis machine (you can get them by installing a compiler, copying the headers, downloading a third party library etc.). Then the process of configuring an analysis unit will be iterative:

  • Get all required files in the delivery and run the packaging and delivery actions in the CAST Delivery Manager Tool
  • Create the correct Analysis Units that you require (usually one per folder, or one per project file). The use of the C and Cpp File Discoverer may be of help for this step.
  • Add include paths (possibly helped by reading project files, or a real compilation log)
  • Add macros (possibly helped by reading project files, or a real compilation log)
  • Run the analysis (in test mode), examine the log
  • Repeat the process until the log is clean.

How to read a compilation log

If you run a real compilation (or get a real compilation log), you may be able to see the options you should define in your Analysis Units. Macros are usually defined with -D and include paths with -I. If the compilation logdoes not show that, you may try to increase its verbosity or use the -N option of make to get a debug run of the compilation.

Where should I start? Macros or include paths?

There is no easy answer. Usually, header files contain the definition of many, many macros. It is therefore better to start and correct the include paths first. However, in some cases, the choice of header files that will be included itself depends on a macro. So you should define this macro correctly before trying to solve problems with this header.

Normally, the only macros that you should define in an Analysis Unit configuration are macros related to the configuration. For instance, macros such as WIN32, UNIX, GCC_VERSION, USE_SSL can be correct. Macros like ANA_WIZARDDLG_EXPORT, CHECK, XXX_H are suspect. Macros that match a keyword such as int, void etc. are always wrong.

Almost all the macros that you must define are used inside a #if or #ifdef directive. You should almost never directly define macros that appear directly in normal source code. Those are usually defined in headers files, sometimes controlled by configuration macros (the ones that may need to be defined).

If you find yourself having to define more than two dozen macros, you probably have another problem: the macros are not set to the correct values, some include paths are still missing etc. We have seen users defining hundreds of macros: this will never lead to a good analysis and each added macro will only decrease the analysis quality and increase the risk of crashes. Very often, removing all of the macros and adding just one can solve all macro related issues. The art is to find which macro to add.

Using the CAST Delivery Manager Tool

  • create a new Version
  • create a new Packages for your C / C++ application source code using the appropriate options (as explained in What you should package?)
  • define the location settings (root folder, SVN/TFS details) of your Application source code
  • Run the Package action (click to enlarge) on the entire version:

  • On completion, check the following:
What to checkDescription
Package Content tab for your C / C++ source code package

The Package Content tab for your C / C++ source code package to see how the CAST Delivery Manager Tool has discovered and interpreted your C / C++ application. You need to pay particular attention to the following items:

  • Content State: displays the current state of the source code - if any alerts are listed, then this means that the CAST Delivery Manager Tool was not able to find all the application's source code based on configuration files such as .vcproj or .vcxproj. See Package Alerts tab below.
  • Projects Found: all projects found that are listed as Selected will be transformed into an Analysis Unit in the CAST Management Studio when you deliver the source code. Any that are marked as Ignored will not be automatically transformed into Analysis Units

Click to enlarge:

Package Alert tab for your C / C++ source code packageThe Package Alert tab for your C / C++ source code package indicates whether any alerts have been found during the packaging process.

Alerts generally indicate that the source code package is incomplete, that there is a configuration issue or simply that there is something wrong in the source code. If these alerts are not dealt with and the Version is delivered, then there is a risk that the source code analysis executed in the CAST Management Studio will be erroneous or may not even complete.

It is up to you as the Delivery Manager to manage these alerts. Initially, you should always attempt to remediate alerts using the following methods:

  • by altering the source code package configuration (for example the root path defined in Package Configuration tab - Where is your source code? may be incorrect) and then repeating the Package action
  • by creating additional source code packages that target the missing projects, files and folders and then repeating the Package action
  • by altering your original source code and then repeating the Package action

If you still have alerts after performing the above actions, you may need to use an ignore action or remediate them manually.

Delivery Report

Use the View delivery report to check the delivery at a global level. This option will generate an XML based report that can easily be exported and lists all items in the delivery, for example:

  • Projects found
  • Alerts
  • etc.

The report will open with the default application assigned to open XML files. The report will only contain information once the Package action has been run.

  • When you are happy that the extraction accurately reflects your C / C++ application source code, deliver the Version:

Analyzing your source code

Using the CAST Management Studio:

  • Accept and deploy the Version in the CAST Management Studio. Any projects that were discovered in the CAST Delivery Manager Tool will be transformed into Analysis Units:

  • You should now check and edit (if necessary) the default automated analysis configuration settings that have been set for you during the package deployment. See C and Cpp - Analysis configuration.
  • When you are satisfied that you have configured your analysis correctly, we suggest that you run a test analysis at Application level before you generate a new snapshot (no results will be saved to the CAST Analysis Service):

  • On completion, you should check the test analysis log file and then clear up any warning or error messages that have been returned by reconfiguring the analysis - see C and Cpp - Analysis messages for more information about log messages:

  • When all issues and problems have been resolved, you can then use the Run Analysis only option to perform an analysis AND save the results in the CAST Analysis Service:

  • Finally you can check the analysis results using, for example, CAST Enlighten and then generate a snapshot.
  • No labels