This information is only valid for CAST Dashboard ≥ 2.x when using a ZIP/JAR deployment (i.e. without Apache Tomcat).
The following situations require some small changes to the Dashboard deployment process so that each Dashboard deployment does not conflict with another:
- when multiple standalone 2.x Dashboards need to be run from the same server
- when embedded AIP Console Dashboards (from v. 1.25) need to be run on the same machine as standalone 2.x ZIP/JAR dashboards
Step 1 - Change the port on which the Dashboard is running - Linux and Microsoft Windows
By default the ZIP/JAR Dashboards are preconfigured to run on the following ports to accept incoming connections:
If you want to run multiple ZIPs / JARs on the same server, you must ensure that each Dashboard uses a unique port. You can change the port in the following file:
Locate the following lines in the file:
Standalone dashboards # Configure server port. This is necessary only for the .jar mode/version # server.port=8080 Embedded dashboards # Configure server port. This is necessary only for the .jar mode/version server.port=8087
server.port line (if commented) and modify the port number to make it unique and save the file:
Restart the application to ensure the changes are taken into account.
If you change the port number for your embedded dashboards, you will need to update the configuration in AIP Console, see Administration Center - Settings - Dashboard Integration:
Step 2 - Change Microsoft Windows service name - Microsoft Windows only
If you are deploying the dashboards on Microsoft Windows and you intend to run them via a Microsoft Windows service, you must make some changes BEFORE you install the services or run the wizard installer in ≥ 2.5 so that each service is unique. For each service that you want to install, perform the following actions:
Modify the dashboard-service-install.bat file
Open the following file with a text editor:
Change the following lines to something unique, for example, add a digit for each dashboard:
set SERVICE_NAME=dashboard-service set DISPLAY_NAME="CAST Dashboard Service" set DESCRIPTION="CAST Dashboard Service"
set SERVICE_NAME=dashboard-service-1 set DISPLAY_NAME="CAST Dashboard Service 1" set DESCRIPTION="CAST Dashboard Service 1"
Save the file.
Rename the .exe files to match SERVICE_NAME
Now rename the following .exe files to match EXACTLY the name you chose for SERVICE_NAME in dashboard-service-install.bat:
<install_folder>\dashboard-service.exe <install_folder>\dashboard-servicew.exe <install_folder>\amd64\dashboard-service.exe
<install_folder>\dashboard-service-1.exe <install_folder>\dashboard-servicew-1.exe <install_folder>\amd64\dashboard-service-1.exe
Run the dashboard-service-install.bat
The final step is to run the following file to install the Microsoft Windows Service for your dashboard:
Ensure that the service has been installed and run it to check that the dashboard launches correctly.
Deleting the services
Note that if you have installed Microsoft Windows services using the method described above, it will not be possible to use the dashboard-service-uninstall.bat provided by CAST to remove the services if they are no longer required. In this scenario, you should instead use the sc.exe utility (provided with Microsoft Windows) from a CMD window (the CMD window must be run with elevated permissions (run as administrator)), for example:
First, identify the display name of the service you want to remove in the services control panel. In the example below this is "CAST HDED Service":
Now run the following command to identify the service's key name (this is not always the same as the display name), where DisplayName = the name displayed in the services list:
sc.exe GetKeyName "DisplayName"
sc.exe GetKeyName "CAST HDED Service"
In our example, the key name is hded-service:
Now run the following command to delete the service:
sc.exe delete "KeyName"
sc.exe delete "hded-service"